november 2015 for automotive power line emc components acm70v common mode filters acm70v ty p e acm-v series
(2/7) 20151120 / cmf_automotive_power_acm70v_en.fm emc components reminders for using these products before using these products, be sure to request the delivery specifications. safety reminders please pay sufficient attention to the warnings for safe designing when using these products. the storage period is less than 12 months. be sure to follow the storage conditions (temperature: 5 to 40c, humidity: 10 to 7 5% rh or less). if the storage period elapses, the soldering of the terminal electrodes may deteriorate. do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150c. soldering corrections after mounting should be within the range of the conditions determined in the specifications. if overheated, a short circuit, performance deterioration, or lifespan shortening may occur. when embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. self heating (temperature increase) occurs when the power is turned on, so the tolerance should be sufficient for the set therm al design. carefully lay out the coil for the circuit board design of the non-magnetic shield type. a malfunction may occur due to magnetic interference. use a wrist band to discharge static electricity in your body through the grounding wire. do not expose the products to magnets or magnetic fields. do not use for a purpose outside of the contents regulated in the delivery specifications. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. if you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) aerospace/aviation equipment (2) transportation equipment (electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications when designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng protection circuit/device or providing backup circuits in your equipment. reminders
(3/7) 20151120 / cmf_automotive_power_acm70v_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. emc components common mode filters for automotive power line features exclusive square type closed magnetic core designed as an ex clusive core is used, so it can be small while maintaining the same features. low profile design makes it opt imal for surface mounting. excellent impedance characterist ics, making it great for suppressing common mode noise. series includes large current products up to 8a, making them compatible with various dc power lines. covers a wide operating temperature range from C40 to +125c. application common mode noise countermeasure for electronic controller dc power lines and power supply lines for car multi-media equipment and various electronic devices. part number construction operating temperature range, package quantity, product weight the storage temperature range is for after the circuit board is mounted. overview of acm70v type acm 70v - 701 - 2pl - tl 00 series name lwh dimensions impedance number of lines packaging style internal code (mm) ( ) at 100mhz 70v 7.06.03.5 701 700 2pl 2 lines tl ?330mm reel 00 type temperature range reel diameter package quantity individual weight operating temperature c storage temperature c mm (pieces/reel) g acm70v C40 to +125 C40 to +125 ?330 1,500 0.35 product compatible with rohs directive compatible with lead-free solders aec-q200 rohs directive compliant product: see the following for more details related to rohs directive compliant products. http://produ ct.tdk.com/en/environment/rohs/
(4/7) 20151120 / cmf_automotive_power_acm70v_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. emc components acm70v type recommended reflow profile preheating soldering peak temp. time temp. time temp. time t1 t2 t1 t3 t2 t4 t3 150c 180c 60 to 120s 230c 10 to 30s 245c 5s natural cooling t3 t1 preheating t2 soldering t3 t3 t4 t2 t1 t: time peak t: temperature
(5/7) 20151120 / cmf_automotive_power_acm70v_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. emc components acm70v type shape & dimensions recommended land pattern circuit diagram 7.00.2 6.00.2 3.5max. 1 2 4 3 4.0typ. 1.50.2 1.50.2 1.50.2 1.50.2 1.50.2 dimensions in mm 3.0 4.0 9.0 1.5 dimensions in mm 1 2 4 3 ? no polarity
(6/7) 20151120 / cmf_automotive_power_acm70v_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. emc components acm70v type electrical characteristics characteristics specification table measurement equipment ? equivalent measurement equipment may be used. impedance vs. frequency characteristics measurement equipment ? equivalent measurement equipment may be used. common mode impedance [at 100mhz] dc resistance [1 line] rated current rated voltage insulation resistance part no. ( )min. ( )typ. (m )max. (a)max.125c (v)max. (m )min. 500 700 15 4.0 80 10 ACM70V-701-2PL-TL00 measurement item product no. manufacturer common mode impedance 4991a agilent technologies dc resistance 4338a agilent technologies insulation resistance 4339a agilent technologies product no. manufacturer 4991a agilent technologies 1 10 100 1000 10000 1000 1 10 100 frequency ( mhz ) impedance ( ) 701 common mode 701 differential mode
(7/7) 20151120 / cmf_automotive_power_acm70v_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. emc components acm70v type packaging style reel dimensions tape dimensions ty p e a w1 w2 n e acm70v ?3302 16.4+2/C0 20.4 typ. 1001 2 typ. dimensions in mm ty p e a b ?d0 e f p0 p1 p2 w k t acm70v 6.60.1 7.60.1 1.5+0.1/0 1.750.1 7.50.1 4.00.1 8.00.1 2.00.1 16.00.3 3.60.1 0.40.05 ty p e l acm70v 440min. ?13.0 0.2 ?21.0 0.8 n e 2.0 0.5 a dimensions in mm 1.0 w2 w1 b fe w p0 p2 p1 a ?d0 t k dimensions in mm 160min. taping l drawing direction 500 to 560min.
|
